The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Windsor Sensor XP 12 - a Sebo Clone?  (Read 8366 times)

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6374
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Windsor Sensor XP 12 - a Sebo Clone?
« on: January 06, 2016, 10:05:32 am »
So here is something few of us will have seen before.......

I was on an American owned cruise ship recently and the cleaners were all using these Sebo clones. So I snaffled one to take a look. As you do.













This is the company that markets them in the US. They are on US Amazon for $545. The type plate says Englewood, Colorado. Not a surprise as these are 120v machines.

But the label also says "Made in Germany", which is where Sebos are made.

A little badge engineering perhaps? A Sebo side range for the cleaning industry?


Offline Madrat

  • Member
  • Posts: 2923
  • Country: england
  • Gender: Male
Re: Windsor Sensor XP 12 - a Sebo Clone?
« Reply #1 on: January 06, 2016, 11:12:18 am »
Good find  :thumbsup:

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Windsor Sensor XP 12 - a Sebo Clone?
« Reply #2 on: January 06, 2016, 02:49:25 pm »
There's alot of badge engineered SEBO machines out there, especially in the states. Windsor, Jeyes, Karcher

That's just an X1 Automatic in a pretty frock
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline Madrat

  • Member
  • Posts: 2923
  • Country: england
  • Gender: Male
Re: Windsor Sensor XP 12 - a Sebo Clone?
« Reply #3 on: January 06, 2016, 05:22:20 pm »
Not that pretty  :))

Offline RustySkull

  • Member
  • Posts: 1555
  • Country: england
  • Gender: Male
  • Kirby, Royal, Sebo =)
    • RustySkull Productions YouTube
Re: Windsor Sensor XP 12 - a Sebo Clone?
« Reply #4 on: February 03, 2016, 08:24:18 pm »
Not that pretty  :))

I was gonna say, it looks like a toy...
If You Like Machines, Radios and Cars As Well As Vacuum Cleaners Then Check Out The Official RustySkull Productions YouTube!
>>>>>>RustySkull Productions YouTube!<<<<<< >>>>>Twitter<<<<<>>>>>Instagram<<<<<

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6374
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: Windsor Sensor XP 12 - a Sebo Clone?
« Reply #5 on: December 08, 2022, 07:33:16 pm »
Waking up a very old topic from 2016 here. Before we knew what a Windsor Sensor was.

A customer in the US asked us for some parts for his old Windsor Sensor vacuum this week. He sent over some photos so we were all on the same page. As stated above, these are essentially a Sebo X1 so we can supply pretty much anything that isn't a motor or PCB for these machines (as we don't keep 120v stuff). For example, if you need a Windsor Sensor hose in the US, look here: >>Buy a Windsor Sensor Vacuum Hose in the US<<.

These are not the most artistic of photos, and this is a machine that has had a hard life, but if you are searching for Windsor Sensor information, perhaps interesting.

















If you happen to have an old Windsor Sensor vacuum in the UK, dead or alive, and if it's not expensive, we'll buy it for curiosity purposes. Get in touch >here<.

 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram