The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson DC04 very difficult to recline.  (Read 406 times)

Offline MalcyD

  • Member
  • Posts: 23
  • Country: england
  • Gender: Male
Dyson DC04 very difficult to recline.
« on: March 18, 2017, 08:15:46 PM »
Hello all,

I've just replaced the motor and drive belt on my DC04 (none clutch model). As far as I can tell I've fitted everything back correctly and it works fine however, when trying to change from upright to reclined, it's very difficult and there's a loud 'crack' as the machine reclines. I've stripped it down again, apart from taking the motor out and I can't see anything causing any obstructions. Has anyone else had this problem and how do I fix it?

Thanks,

Mal.

Online Madrat

  • Member
  • Posts: 2534
  • Country: england
  • Gender: Male
Re: Dyson DC04 very difficult to recline.
« Reply #1 on: March 18, 2017, 08:50:00 PM »
Something is not aligned or fitted properly, can you post some pictures.

Offline MalcyD

  • Member
  • Posts: 23
  • Country: england
  • Gender: Male
Re: Dyson DC04 very difficult to recline.
« Reply #2 on: March 18, 2017, 09:12:17 PM »
I could post pictures if I knew what to take pictures of.

Online KylesDyson

  • Member
  • Posts: 674
  • Country: england
  • Gender: Male
  • DC04 De stijl, DC01 Standard, DC07 Origin
Re: Dyson DC04 very difficult to recline.
« Reply #3 on: March 18, 2017, 10:40:42 PM »
I could post pictures if I knew what to take pictures of.
Pictures:

I'd say a picture of the bottom end of the chassis,
the inside of the head with the brushroll housing attached
changeover valve
and it all together if you can but not entirely nessasary
KylesDyson of Cannock - Refurbishers of Dyson Vacuum Cleaners
*MAINLY DYSON WITH A BIT OF SEBO SPRINKLED ONTOP* This is now a thread? I thought this was a vacuum forum :)) Not a central heating, random talk, grammar lessons, plastic flimsiness etc, etc, etc. with the occasional vacuum mentioned now.....                                                           So the clutch - Very clutchy if you ask me...

Online Madrat

  • Member
  • Posts: 2534
  • Country: england
  • Gender: Male
Re: Dyson DC04 very difficult to recline.
« Reply #4 on: March 18, 2017, 11:26:17 PM »
both sides upright and reclined

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4500
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dyson DC04 very difficult to recline.
« Reply #5 on: March 19, 2017, 01:59:36 AM »
Look underneath, the issue may be >this part<

Offline MalcyD

  • Member
  • Posts: 23
  • Country: england
  • Gender: Male
Re: Dyson DC04 very difficult to recline.
« Reply #6 on: March 19, 2017, 03:17:01 PM »
Sorted. It was the 'upright lock' A squirt of WD40 and all is now good. Thanks everyone.

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4500
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dyson DC04 very difficult to recline.
« Reply #7 on: March 20, 2017, 06:36:17 PM »
Sorted. It was the 'upright lock' A squirt of WD40 and all is now good. Thanks everyone.

We are good at this sort of thing.  8)

Online KylesDyson

  • Member
  • Posts: 674
  • Country: england
  • Gender: Male
  • DC04 De stijl, DC01 Standard, DC07 Origin
Re: Dyson DC04 very difficult to recline.
« Reply #8 on: March 30, 2017, 12:01:45 AM »
If it were clutched i'd say to check the clutch cover, I had that issue on an Absolute, removed and reinstalled the cover and it was fine after.
KylesDyson of Cannock - Refurbishers of Dyson Vacuum Cleaners
*MAINLY DYSON WITH A BIT OF SEBO SPRINKLED ONTOP* This is now a thread? I thought this was a vacuum forum :)) Not a central heating, random talk, grammar lessons, plastic flimsiness etc, etc, etc. with the occasional vacuum mentioned now.....                                                           So the clutch - Very clutchy if you ask me...

DC04 Spare Parts


 

 

Dyson Spare Parts

 

 

Dyson Universal Adaptor

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram