The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: brush roller switch  (Read 437 times)

Offline jcullen

  • Member
  • Posts: 4
  • Country: us
  • Gender: Male
brush roller switch
« on: April 21, 2017, 05:43:28 PM »
I have power all the way to the brush roller recline switch  (120vac)  no power at the roller head connector, I don't see any breaks in the yolk wires, should I start by changing the yolk loom????   thanks

Online GeorgeJ

  • Member
  • Posts: 355
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: brush roller switch
« Reply #1 on: April 21, 2017, 08:10:15 PM »
If you already checked for power at the bottom of the loom, why not at the top?  The loom might be fine.
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4556
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: brush roller switch
« Reply #2 on: April 21, 2017, 10:27:48 PM »
What model is this?

Offline jcullen

  • Member
  • Posts: 4
  • Country: us
  • Gender: Male
Re: brush roller switch
« Reply #3 on: April 22, 2017, 12:35:02 AM »
DC25 Animal  seven years old,  There's 120 vac at the recline switch, nothing at the 2 prong connector for the brush roller

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4556
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: brush roller switch
« Reply #4 on: April 22, 2017, 12:54:22 PM »
There's 120 vac at the recline switch, nothing at the 2 prong connector for the brush roller

So test the continuity at both ends of the yoke loom. It will likely be broken internally.


 

 

Dyson Spare Parts

 

 

Dyson Universal Adaptor

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram