The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dc22 with dc08 floor tool possible  (Read 439 times)

Offline Mike.heath

  • Member
  • Posts: 12
Re: Dc22 with dc08 floor tool possible
« Reply #15 on: May 09, 2017, 05:33:40 PM »
I'll have a go at your suggestion looks like the only way it will work. The reducers/adaptors are ones I had with my handheld dyson (bought it as a refurbished set) the reducer dosent go inside or over the turbine adaptor unfortunately

Offline Mike.heath

  • Member
  • Posts: 12
Re: Dc22 with dc08 floor tool possible
« Reply #16 on: May 09, 2017, 05:34:10 PM »
Thank you for your help so far

Offline Elgin

  • Member
  • Posts: 731
  • Country: england
  • Gender: Male
Re: Dc22 with dc08 floor tool possible
« Reply #17 on: May 11, 2017, 06:33:52 PM »
Elgin is wrong.

I am not aware there is a reliable adaptor to do what you want. But there may be a work around.

The DC08 head you have, measure across the inside of the tube hole. What does it measure in mm?

Also a photo of the tool ends of old and new would help.

You are correct this is a minefield. Especially with DC08 and DC19 heads. Why we sell >these<.

The other problem you have is any head that is bigger than your original will struggle to spin very fast as the DC22 is a smaller machine than normal with less suction than a full size cylinder.

I dont really have much idea about these adapters

Dyson Cylinder Spare Parts


 

 

Dyson Spare Parts

 

 

Dyson Universal Adaptor

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram