Hi all i purchased a used Dyson from a friend for £20.00 a few weeks ago now. I would like to think I'm fairly good at taking things apart so brought it as a project,the machine turned on but i later found that the head
assembly unit need replaced as the belt had burnt the housing it was cased in and it was well smashed up in the sole plate, i purchased a new
assembly unit and fitted it today, and to my dispair it still refuses to spin!
i figured it must be the brush bar on off
switch or the reset
switch, Taking apart the
switch unit i found the probelm to be the reset
switch as it was burnt out inside,
to test this i joined the two wires up that was going to the reset
switch and found it to work great
My worry is now getting it all back together again when i have ordered the new
switch, i have 2 springs I'm not sure i lost one does anyone know how many springs there should be in the
switch unit ?
Also does anyone have a diagram or better still a video showing how to get the
switch back together again
I kept the motor that spins the brush and this works well still i understand that its a part that can not be purchased is there a for sale page here ?
thanks for any advice