The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Recent Posts

Pages: [1] 2 3 ... 10
1
Second Generation "The Ball" Dysons. / Re: DC41 'upright cam' missing?
« Last post by GeorgeJ on Yesterday at 09:47:10 PM »
The Dyson Man, please have more patience and respect for our members.
2
Dyson Chat / Re: Interesting Vacuum Cleaner Pictures
« Last post by GeorgeJ on Yesterday at 04:55:26 PM »
And some little old lady will still find a way to plug it up and act indignant about the situation.
3
Second Generation "The Ball" Dysons. / Re: DC41 'upright cam' missing?
« Last post by Parwaz7862 on Yesterday at 03:19:45 PM »
No problem.
4
now it makes sense, I have neither of those items
thank you and sorry for the confusion.
6
that black cam I photographed IS L shaped and IS the one I was talking about.......perhaps it would be best to give me a part number for whatever piece it is that YOU are talking about.
7
Second Generation "The Ball" Dysons. / Re: DC41 'upright cam' missing?
« Last post by Parwaz7862 on Yesterday at 03:10:36 PM »
yes, I have the black cam, its in the first pic I took, with the spring fitted over it, you said it wasn't anything to do with it, make up your mind mate, you're just contradicting what you said !!!


....somebody else, PLEASE HELP

You stated in the first post that "I also seem to have a black plastic L-shaped piece with a spring which fits over the shaft"

This is the black cam I was referring to. ^ This is the one that belongs to your vacuum.

The black cam that you photographed, has no association wt the DC41 and doesn't belong to the DC41 at all. Ignore that black cam and focus on the L shaped black cam you have because that is the one I was referring to and is the one you mentioned you have. There's no contradiction, it's just that. Feel free to read over again.
8
yes, I have the black cam, its in the first pic I took, with the spring fitted over it, you said it wasn't anything to do with it, make up your mind mate, you're just contradicting what you said !!!


....somebody else, PLEASE HELP
9
Second Generation "The Ball" Dysons. / Re: DC41 'upright cam' missing?
« Last post by Parwaz7862 on Yesterday at 02:56:20 PM »
let me try and explain to you what doesn't make sense in your 2nd reply
The black cam thing in the first pic you provided does not belong to the DC41. The other one you have (the L shaped one) do you mean just the spring? is the one that belongs to the DC41 with it's microswitch.

Basially, fit the spring to it how? and then pull the other end of the spring over to fit behind the plastic wall what plastic wall?. Put it in a way so that it interacts and presses the microswitch which part of the microswitch? when the stabilisers of the vacuum are in the upright position

sorry mate, you are not making yourself clear.

if anyone else knows, or can explain what he's talking about, please jump in.
[/quote]



########################################################################################


Right,  the L shaped black cam is what I was referring to, I presume you have it since you mentioned you did?

On this black cam, on one side there's a groove where a spring fits, it's quite hard to describe but it's literally self explanatory. the spring has a short end and it fits in this L shaped black cam perfectly.

Now you need to fit it to the plastic pin of the motor housing cover (because it has a hole).

The way you fit it:

Face the vacuum from the exact way you took pic 2. The black cam will be fitted like a V shape  in the way you fit it (hope that's clear enough).

The other end of the spring that's sticking out, bend it slightly downwards  so it fits in with the plastic wall. It's the plastic piece sticking out, about 2 cm long right next to the plastic pin sticking out, by the micro switch.

Once fitted, make sure you know it works for sure. To do this, put the vacuum upright and see if the switch gets pressed by the black cam.


Sorry if it's not making sense but it is quite hard to describe. It's the best I could do since I've not got a pic of the way it goes on. These new Dysons are quite complicated, they have a lot of springs that fit on in certain ways, they only go on one way. Sorry mate...
10
let me try and explain to you what doesn't make sense in your 2nd reply
The black cam thing in the first pic you provided does not belong to the DC41. The other one you have (the L shaped one) do you mean just the spring? is the one that belongs to the DC41 with it's microswitch.

Basially, fit the spring to it how? and then pull the other end of the spring over to fit behind the plastic wall what plastic wall?. Put it in a way so that it interacts and presses the microswitch which part of the microswitch? when the stabilisers of the vacuum are in the upright position
[/quote]

sorry mate, you are not making yourself clear.

if anyone else knows, or can explain what he's talking about, please jump in.
Pages: [1] 2 3 ... 10

 

Dyson Spare Parts

 

 

Dyson Universal Adaptor

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram