Dyson DC07

[spikey1509]

• Tweet

Hi,

   I'm after some assistance with a Dyson DC07. I have bought a new body for the DC07, as the previous one snapped at the neck. I've threaded the new cable and connected the motor. But, when I came to put the machine upright. it doesn't completely close the gap on the side valve assembly. For some reason the side valve assembly on the right-hand side of the machine will not complete it's travel!..

  There's not a different body for an unclutched & clutched model is there?.. I'm guessing the only component affected by the clutch is the brush bar cover?..

   Please can anyone help me, the DC07 stands up but, the valve assembly doesn't completely close!!..

     Kind Regards,

      Jason

[bluebumble485]

i think you will find the motor casing is not in right take out re do it ,the motor cover should be in
correctly in the right grove on the motor case you will find that will sort it

[spikey1509]

Thanx for that Bluebumble485, exactly what the problem was, motor casing re-attached properly and valve assembly now works correctly.

Thanx for your help,

Kind Regards,

Jason

[bluebumble485]

glad you are sorted
it happens to me sometimes as well .all the motors i change you would think i would learn lol