The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum
All running fine still, but I have a further query on the DC25 please. How much do you have to strip down to fit a new Yoke Loom Assembly?https://manchestervacs.co.uk/Dyson/DC25-spare-parts.html/DC25-Yolk-Loom-Assembly-916190-01.htmObviously the left side cover comes off (3 screws) to disconnect the two wires, and then there are two screws on the top of the yoke just behind where the cleanerhead mounts on. Can you extract and refit the loom from that stage, or do you have to take the yoke off completely for access?I've been studying beko's excellent stripdown guide, but that doesn't tell me which parts need to come off to do certain tasks (like the above, and also a motor change). And, just as importantly, which parts don't need to come off. This is the first ball model I've worked on, and the extra complexity (compared to the DC01/04/07/14) is such that I'm reluctant to dismantle more than I need to to do certain jobs (on the basis that putting it back together again will be challenging).It would be great to see a step by step guide to changing the main motor on this model (so far all I've done is strip down and recondition the cleanerhead motor). There's a sticky for the DC15 motor change, but not for the DC25 as yet.