Author Topic: DC40 Loom Wiring Help Please? (Read 10905 times)

swannei · « **on:** January 17, 2015, 01:37:26 pm »

Hi
im just having this problem .please could someone tell me is the white or black the positive ,I have it all apart but that bit jumped before I could see which way the wires were in the socket. woops!
please help I am so close to the fix

swannei · « **Reply #1 on:** January 17, 2015, 03:15:51 pm »

Hi
Please help I posted on an old thread but I recon you can help.please tell me on the similar loom on the dc40 is the white or black the positive or has anyone got a pic of the socket that the round spades secure on.(dc40)
I've got the part on order but forgot which way they go...
Thanks if you can help

swannei · « **Reply #2 on:** January 17, 2015, 08:54:59 pm »

Hi all
I was hoping i could find some help,I know the problem and have the cable on order due to your old posts (THANKS

).
BUT
when i removed the the cable one black and one white.they jumped out of the female block connector that they sit in(the part that plugs in to the hoover head (roller motor)
Please does anybody know which way they go or have a photo of this part with the wires in it.

MVacs · « **Reply #3 on:** January 17, 2015, 09:31:55 pm »

I've put your three posts in one topic. Spreading them around different topics wont help.

I'll ask our chap on Monday if he remembers if nobody else knows.

Although, in wiring, when one has a black and white wire, the black would usually be live. It would do no harm to wire it that way and quickly try it to see if the brush spins the right way.

MVacs · « **Reply #4 on:** January 17, 2015, 09:41:16 pm »

Is this it?

swannei · « **Reply #5 on:** January 17, 2015, 09:50:22 pm »

That's Amazing thanks so much.im sure you all know but ill document the repair when my part arrives for anyone else with this problem.for now I'm hoovering without a roller.

Thanks again you have been so helpfull