The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC01 scratching my floor  (Read 7714 times)

Offline burrettwilce

  • Member
  • Posts: 3
DC01 scratching my floor
« on: January 08, 2015, 02:48:20 pm »
Hi, my DC01 is scratching my newly-laid karndean floor! I have checked the underside but I can't find anything that might be causing it. The scratches are very fine and go into the vinyl itself, not just 'scuffing'. Has anyone else had this problem and if so, what part to replace?! Thanks

Offline Madrat

  • Member
  • Posts: 2923
  • Country: england
  • Gender: Male
Re: DC01 scratching my floor
« Reply #1 on: January 08, 2015, 05:22:06 pm »
Brush bar?  Might be time for a dyson with a clutch.

Offline burrettwilce

  • Member
  • Posts: 3
Re: DC01 scratching my floor
« Reply #2 on: January 08, 2015, 06:34:18 pm »
Thanks. If it was the brush bar, would it leave a continuous mark?

Offline Madrat

  • Member
  • Posts: 2923
  • Country: england
  • Gender: Male
Re: DC01 scratching my floor
« Reply #3 on: January 08, 2015, 08:14:45 pm »
I'm not 100% as I've not seen your floor, but I would imagine if there is nothing rough or sharp on the bottom it would be the likely cause. Dyson do recommend turning off the brushes on hard flooring (not much help if yours has a fixed brush bar) , and I have heard of laminate floors being scratched by them but to be honest even then you risk scratching them as its a hard surface on a hard surface.  I would sugest either using a brush or a dusting mop, or get a cylinder dyson and floor tool with brushes that can be lowered.

Offline DC01020304vacs

  • Member
  • Posts: 104
  • Country: gb
  • Gender: Male
  • Me, myself and?? My Dysons
    • Range Rover Spare Parts
Re: DC01 scratching my floor
« Reply #4 on: January 08, 2015, 08:57:54 pm »
Why not buy the hard floor brush for a dc01/02 that fits on the end of the wand. That way it saves changing the whole vacuum cleaner??  :thumbsup:

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: DC01 scratching my floor
« Reply #5 on: January 08, 2015, 09:24:33 pm »
It could be the sole plate pushing any grit it finds against itself and into the flooring sadly. The DC01 was never great for hard floors. Either a cheap 32mm (or original proper Dyson floor tool for the early machines, a few on ebay) or it's time to upgrade to a DC04 or cylinder!

Shame, nice to hear of a DC01 in daily use!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline Madrat

  • Member
  • Posts: 2923
  • Country: england
  • Gender: Male
Re: DC01 scratching my floor
« Reply #6 on: January 08, 2015, 10:03:53 pm »
That would work, probably fine one on ebay as beko said.

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: DC01 scratching my floor
« Reply #7 on: January 09, 2015, 09:19:27 am »
https://manchestervacs.co.uk/Dyson/DC02-floor-tool

A pattern copy of the original floor tool. The benefit of this over others is it'll be light, and less likely to snap the wand in use. Genuine ones are out there though, I got one for my DC01 DeStijl for £6 posted last year, which I think was a steal!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline burrettwilce

  • Member
  • Posts: 3
Re: DC01 scratching my floor
« Reply #8 on: January 09, 2015, 02:22:49 pm »
Thanks to all. I love my Dysons (01 and 03) and they get used on an almost daily basis! As suggested, I have decided to buy a DYSON ARTICULATING HARD FLOOR TOOL.

Offline Madrat

  • Member
  • Posts: 2923
  • Country: england
  • Gender: Male
Re: DC01 scratching my floor
« Reply #9 on: January 09, 2015, 02:26:37 pm »
Nice to know the old girls will not be turned out.  :thumbsup:

DC01 Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram