The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson DC07 All Floors - Stripdown and Refurb  (Read 14133 times)

Offline beko1987

  • Member
  • Posts: 4477
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #30 on: January 06, 2016, 06:51:12 PM »
I've never thought of doing it that way, normally I pull the rod out with some force and the bit falls out the bottom, then goes in the bin...

Are these critical? Sure I've only seen them on a few dc07's, are they early or late in the range?
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline smithy

  • Member
  • Posts: 5
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #31 on: January 07, 2016, 04:03:57 PM »
I think we got our DC07 just after they came out so probably early ones.  Looking at the fins on it it's got to do something to the airflow.  Does the air flow out of the cyclone at the bottom or is it coming up there?

Online bluebumble485

  • Member
  • Posts: 308
  • Country: gb
  • Gender: Male
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #32 on: January 08, 2016, 03:09:07 PM »
you are welcome lol

Online bluebumble485

  • Member
  • Posts: 308
  • Country: gb
  • Gender: Male
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #33 on: January 08, 2016, 03:12:11 PM »
beko only on earlier ones I have seen the bit ,no idea what its for I just take it out and throw away ,I assume the dyson guys have said the same lol

Offline T120bonnie

  • Member
  • Posts: 1
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #34 on: May 17, 2019, 11:10:44 AM »


Thanks for taking the time to post this guide, must have taken you a long time, but saved me a few headaches swapping out a DC07 chassis this week. The cylcone retention clip broke on one of ours and that meant the whole chassis needed replacing. Flea-bay to the rescue once again, but seriously thanks for the post!

Online bluebumble485

  • Member
  • Posts: 308
  • Country: gb
  • Gender: Male
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #35 on: May 17, 2019, 06:01:16 PM »
glad it was of use to people

Offline beko1987

  • Member
  • Posts: 4477
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Dyson DC07 All Floors - Stripdown and Refurb
« Reply #36 on: May 17, 2019, 06:27:01 PM »
Me too, thanks for your kind comments, glad it helped! Chassis swaps are a pain because it's not particularly tricky, but EVERYTHING has to come off!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

DC07 Spare Parts


 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram

Registration