Author Topic: DC04 MOTOR IN DC07 (Read 8546 times)

Elgin · « **on:** November 29, 2016, 10:41:27 pm »

Can I fit a motor originally used In a Dyson DC04 to a DC07, Would be using all the dc07's rubbers etc. thanks

Parwaz7862 · « **Reply #1 on:** November 30, 2016, 12:30:13 am »

Depends on which DC04. If it's a clutched one, then yes. Zorbster, probs best if you swap the TOCs over and a basic clutched one is fine. The suction may be a little underwhelming than on a normal DC07 motor, based on personal experience that's what I found.

Elgin · « **Reply #2 on:** December 06, 2016, 11:49:27 pm »

Quote from: Parwaz7862 on November 30, 2016, 12:30:13 am

Depends on which DC04. If it's a clutched one, then yes. Zorbster, probs best if you swap the TOCs over and a basic clutched one is fine. The suction may be a little underwhelming than on a normal DC07 motor, based on personal experience that's what I found.

well I bought a used dc07 motor and decided to put the dc07 one in my dc04 and the dc04 in my 7, Suction on the 7 isn't bad, although there is a horrible noise when you put your hand over the handle, and the suction on the 4 is brilliant.
Well I'm assuming it was a 7 motor I bought, It said it was removed from a working dc07, when it arrived it said it was a YV511 on the motor, but sounds like a 07 motor. both machines work brilliantly

Parwaz7862 · « **Reply #3 on:** December 06, 2016, 11:53:44 pm »

When I put a clutched DC04 motor into a DC07 Origin, it sounded like a DC14 Origin with a Samsung motor (almost) and had less suction than a DC33.

dragoncurt · « **Reply #4 on:** January 13, 2017, 11:37:12 am »

You can put a dc07 motor in a dc04. That'll be cool.

RustySkull · « **Reply #5 on:** January 13, 2017, 06:52:34 pm »

Do it, make it rock!

dragoncurt · « **Reply #6 on:** January 14, 2017, 04:27:34 pm »

Yh why not and does any motor from the dc07 work in the dc04 then.

Elgin · « **Reply #7 on:** January 14, 2017, 10:49:06 pm »

Quote from: dragoncurt on January 14, 2017, 04:27:34 pm

Yh why not and does any motor from the dc07 work in the dc04 then.

Yes, It will fit any DC04, however you would have to buy the Ametek to YDK dc04 motor kit for the lime and grey and the blue grey dysons.

dragoncurt · « **Reply #8 on:** January 15, 2017, 10:01:17 am »

Oh that's good then. Thanks

Elgin · « **Reply #9 on:** January 15, 2017, 12:48:42 pm »

Quote from: Elgin on January 14, 2017, 10:49:06 pm

Quote from: dragoncurt on January 14, 2017, 04:27:34 pm
Yh why not and does any motor from the dc07 work in the dc04 then.
Yes, It will fit any DC04, however you would have to buy the Ametek to YDK dc04 motor kit for the lime and grey and the blue grey dysons.

You can get the 'Ametek to YDK motor kit' here:https://shop.manchestervacs.co.uk/dyson-upright-vacuum-cleaner-spares/dc04-spares/dc04-ametek-motor On Manchester vacs.

dragoncurt · « **Reply #10 on:** January 15, 2017, 04:00:22 pm »

Oh thanks

Elgin · « **Reply #11 on:** January 17, 2017, 05:19:30 pm »

Quote from: dragoncurt on January 15, 2017, 04:00:22 pm

Oh thanks

What colour DC04 have you got/are talking about in this thread?

dragoncurt · « **Reply #12 on:** July 21, 2017, 06:47:16 pm »

Quote from: Elgin on January 17, 2017, 05:19:30 pm

Quote from: dragoncurt on January 15, 2017, 04:00:22 pm
Oh thanks
What colour DC04 have you got/are talking about in this thread?

I've only just seen this sorry. I was talking about the lime one. Thans

Dysonboy · « **Reply #13 on:** August 15, 2018, 02:35:38 am »

Quote from: Parwaz7862 on December 06, 2016, 11:53:44 pm

When I put a clutched DC04 motor into a DC07 Origin, it sounded like a DC14 Origin with a Samsung motor (almost) and had less suction than a DC33.

revivng my old dead thread here, But just come across this comment. I remember the sound when I fitted a YV-511 to my DC07, When I gave my nan her DC14 From one I recently bought I swapped the Samsung motor for your usual Panasonic 2200. Shoved the Samsung in my DC07 and immediatly recognised the sound, very much similar to the YV-511 sound.