The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum
Hi all I still do not know why but my dc07 pre-motor filter is getting so much dirt on it also I checked the post motor filter and to my surprise there what even dirt there which I do not know why would that get there. Never seen any dirt before. But I was wondering if anyone knows probably why as I've cleaned the cyclone out and filter and everything I can do but I can't seem to understand why there is so much dirt in the pre-motor filter. My mum has the dc04 and well I've never so far since having it needed to clean the pre-motor filter. I would just like to see all your opinions. I feel like I should just get a different Dyson. ThanksI will post pictures later.
Yh. I just don't understand my one though, as like you say the dc07 you had and I only vacuum up the average house dirt which the dc04 does fine and not even a single bit of dust is even on the pre motor filter on that. Do you think I should try and get the one which the cyclone is cut down or any as they all pretty much worked fine didn't they ? As I do like the dc07 design and well everything about it :) I would not want to get rid of it over a small issue like that. Do you know where the best place is to buy them from I will check Manchester vacs first Thanks
Thanks for the help.I found this one https://goo.gl/aDXlMv It has no bin or handle which I wondered to come on here to ask. I currently have a bin and handle for this one at the moment so I thought to ask does the dc07 fit any handle or bin. If so then I can make an offer on it. It looks not bad and it is a number 2 :) Thanks
Quote from: Elgin on February 03, 2017, 10:53:36 pmQuote from: dragoncurt on February 03, 2017, 10:00:19 pmThanks for the help.I found this one https://goo.gl/aDXlMv It has no bin or handle which I wondered to come on here to ask. I currently have a bin and handle for this one at the moment so I thought to ask does the dc07 fit any handle or bin. If so then I can make an offer on it. It looks not bad and it is a number 2 :) ThanksYes thats perfect!Just take your handle assembly off, Make sure the pole on the handle goes into the bin catch on the bottom of the cyclone (Made that mistake once) and then fit your bin.BTW. What colour machine is it now? wondered if you were going the same original colour or wether your gonna "Pimp it out"Currently "Pimping out" my 07 Animal (The lavendar purple ones)
Quote from: dragoncurt on February 03, 2017, 10:00:19 pmThanks for the help.I found this one https://goo.gl/aDXlMv It has no bin or handle which I wondered to come on here to ask. I currently have a bin and handle for this one at the moment so I thought to ask does the dc07 fit any handle or bin. If so then I can make an offer on it. It looks not bad and it is a number 2 :) ThanksYes thats perfect!Just take your handle assembly off, Make sure the pole on the handle goes into the bin catch on the bottom of the cyclone (Made that mistake once) and then fit your bin.BTW. What colour machine is it now? wondered if you were going the same original colour or wether your gonna "Pimp it out"Currently "Pimping out" my 07 Animal (The lavendar purple ones)
Quote from: Elgin on February 03, 2017, 10:53:36 pmQuote from: dragoncurt on February 03, 2017, 10:00:19 pmThanks for the help.I found this one https://goo.gl/aDXlMv It has no bin or handle which I wondered to come on here to ask. I currently have a bin and handle for this one at the moment so I thought to ask does the dc07 fit any handle or bin. If so then I can make an offer on it. It looks not bad and it is a number 2 :) ThanksYes thats perfect!Just take your handle assembly off, Make sure the pole on the handle goes into the bin catch on the bottom of the cyclone (Made that mistake once) and then fit your bin.BTW. What colour machine is it now? wondered if you were going the same original colour or wether your gonna "Pimp it out"Currently "Pimping out" my 07 Animal (The lavendar purple ones)Oh thanks then I will look around still see if I can get any other ones and oh aha thanks for telling me. It is the yellow one, but I do not mind "Pimping out" as I don't really mind as long as I get a new cyclone. Oh true then but it does happen to me as a lot of the dirt just seems to go past the cyclone to the pre motor filter so my suction is bad too as that's why I need a new cyclone. I have also ordered a new filter though.