The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC27 doesn't recline,  (Read 4340 times)

Offline autovac01

  • Member
  • Posts: 229
  • Country: gb
  • Woman in a man's world.
DC27 doesn't recline,
« on: January 16, 2017, 11:05:55 am »
Old posts have mentioned a problem with the changeover valve when the machine is switched on but this one is jammed in an upright position. Any thoughts before I start taking it apart?

Offline Parwaz7862

  • Member
  • Posts: 3412
  • Country: gb
  • Gender: Male
  • Dyson geek 😃
Re: DC27 doesn't recline,
« Reply #1 on: January 16, 2017, 03:07:56 pm »
That black lever that you find on DC07/14/27/33s under the cleanerhead, behind the brush housing in the groove of the motor housing and is cured by levering it and spraying WD40 in there and onto the lever's end which has a roller wheel that should do the trick ;)

Offline RustySkull

  • Member
  • Posts: 1555
  • Country: england
  • Gender: Male
  • Kirby, Royal, Sebo =)
    • RustySkull Productions YouTube
Re: DC27 doesn't recline,
« Reply #2 on: January 16, 2017, 09:38:19 pm »
WD40 fixes EVERYTHING
If You Like Machines, Radios and Cars As Well As Vacuum Cleaners Then Check Out The Official RustySkull Productions YouTube!
>>>>>>RustySkull Productions YouTube!<<<<<< >>>>>Twitter<<<<<>>>>>Instagram<<<<<

DC14 Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram

Registration