The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson DC47 Motor Replacement  (Read 2095 times)

Offline Newton Grave

  • Member
  • Posts: 16
  • Country: gb
  • Gender: Male
Re: Dyson DC47 Motor Replacement
« Reply #15 on: January 10, 2018, 01:49:57 PM »
Yeh!!

Cracked it and now back together again. The problem was not screws through the top handle unit, this only comes off with screws from underneath. Eventually brute force allowed me to open up both sides. There was a problem however:

The three silver screws on the top of the service side that MVacs highlighted in read above hold the drum brake and if removed that unit will twist and jam. Once I had the unit apart is was reassembled with that part reattached and everything went back together quite easily.

So DO NOT remove these screws to crack the case open.

I am taking photos of reassembly and will extend this thread with a more comprehensive guide for this vac when I have a bit of time.


Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 5118
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dyson DC47 Motor Replacement
« Reply #16 on: January 10, 2018, 07:01:00 PM »
I am taking photos of reassembly and will extend this thread with a more comprehensive guide for this vac when I have a bit of time.

Excellent. That will fill a nice missing gap in forum knowledge.  :thumbsup:

Offline Newton Grave

  • Member
  • Posts: 16
  • Country: gb
  • Gender: Male
Re: Dyson DC47 Motor Replacement
« Reply #17 on: January 10, 2018, 07:24:00 PM »

Dyson Cylinder Spare Parts


 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram