The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Using WD40 on Dysons  (Read 2644 times)

Online beko1987

  • Member
  • Posts: 3871
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Using WD40 on Dysons
« Reply #45 on: May 10, 2017, 08:47:03 AM »
Ha, speaking of those, I was tempted to get one at the car boot (was some bloke selling them for 4) and see if the bearings were any use on anything!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline GeorgeJ

  • Member
  • Posts: 390
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: Using WD40 on Dysons
« Reply #46 on: May 10, 2017, 04:38:45 PM »
Ha, speaking of those, I was tempted to get one at the car boot (was some bloke selling them for 4) and see if the bearings were any use on anything!
Chances are they're low quality bearings at that price (or they were stolen... ha).  You'll get a better deal buying them in bulk online.
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Offline RustySkull

  • Member
  • Posts: 1519
  • Country: england
  • Gender: Male
  • Kirby, Royal and Sebo =)
    • RustySkull Productions YouTube
Re: Using WD40 on Dysons
« Reply #47 on: May 11, 2017, 09:53:16 PM »
I don't know why you all panic so much really... Oil and forget.
If You Like Machines, Radios and Cars As Well As Vacuum Cleaners Then Check Out The Official RustySkull Productions YouTube!
>>>>>>RustySkull Productions YouTube!<<<<<< >>>>>Twitter<<<<<>>>>>BookFace<<<<<

Online ryevac

  • Member
  • Posts: 79
  • Country: gb
  • Gender: Male
  • Trevor
Re: Using WD40 on Dysons
« Reply #48 on: May 21, 2017, 01:19:13 PM »
i try not to use wd40, unless to free off seized metal parts.
Ptfe based spray i find ok for moving plastics.

Grease from the tub is good for other applications but a word of warning using the pound shop aerosol style grease.

I believe it is petroleum based, i had an electric black and decker strimmer in for repair, the one with the moving plastic swivel head. stripped - found the bad cable, thought i would clean up the motor and commutator etc whilst in there.

All went well, then i thought after reassembly the head plastics felt a bit rough when twisting and locking into required position, a liberal spray of this grease into the moving plastics well sorted it.....
However, as i suspect it is petroleum based (smells like it to me ) it produced a highly flammable vapour in the head assembly which isnt good with the slightest spark from the motor brushes....

This one exploded as i tested the unit, quite a bang for a small amount of spray grease.
Very funny looking back  ;D
If it was assembled it can be disassembled - if we can't repair it then it probably isn't worth repairing !

Offline GeorgeJ

  • Member
  • Posts: 390
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: Using WD40 on Dysons
« Reply #49 on: May 22, 2017, 04:56:40 PM »
Oof....  that's not fun.  I've always tried to limit WD40 to metal...  I'll start trying it with some plastics.
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Online Madrat

  • Member
  • Posts: 2765
  • Country: england
  • Gender: Male
Re: Using WD40 on Dysons
« Reply #50 on: May 22, 2017, 04:59:27 PM »
lol did you have an involuntary bowel movement   :))

Offline GeorgeJ

  • Member
  • Posts: 390
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: Using WD40 on Dysons
« Reply #51 on: May 22, 2017, 05:14:15 PM »
What happens between me and the seat on the bus are none of your concern.
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Offline RustySkull

  • Member
  • Posts: 1519
  • Country: england
  • Gender: Male
  • Kirby, Royal and Sebo =)
    • RustySkull Productions YouTube
Re: Using WD40 on Dysons
« Reply #52 on: May 22, 2017, 10:37:41 PM »
You lot over think everything lol.
WD40 is harmless.

As for clock movements, I use 15W40.
If You Like Machines, Radios and Cars As Well As Vacuum Cleaners Then Check Out The Official RustySkull Productions YouTube!
>>>>>>RustySkull Productions YouTube!<<<<<< >>>>>Twitter<<<<<>>>>>BookFace<<<<<

Offline GeorgeJ

  • Member
  • Posts: 390
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: Using WD40 on Dysons
« Reply #53 on: May 22, 2017, 10:41:40 PM »
You lot over think everything lol.
WD40 is harmless.

As for clock movements, I use 15W40.
I just want to make sure I don't, for instance, spray a bunch of WD40 into the guts of a Dyson ball then watch it all melt away.  Listing a salvage power cord, cyclone and handle on ebay is alot less fun than a working machine :))

Also, I soak everything in diesel before I work on it.
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Offline RustySkull

  • Member
  • Posts: 1519
  • Country: england
  • Gender: Male
  • Kirby, Royal and Sebo =)
    • RustySkull Productions YouTube
Re: Using WD40 on Dysons
« Reply #54 on: May 22, 2017, 10:45:02 PM »
Also, I soak everything in diesel before I work on it.

You're better off with a mix of Gas Oil and Kero.
If You Like Machines, Radios and Cars As Well As Vacuum Cleaners Then Check Out The Official RustySkull Productions YouTube!
>>>>>>RustySkull Productions YouTube!<<<<<< >>>>>Twitter<<<<<>>>>>BookFace<<<<<

Offline GeorgeJ

  • Member
  • Posts: 390
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: Using WD40 on Dysons
« Reply #55 on: May 22, 2017, 10:47:05 PM »
Diesel isn't as explosive.... but ok....  I'll trust you.

Should I also mix bleach and ammonia in the basement when cleaning the machines?
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Offline theheadschoice

  • Member
  • Posts: 42
Re: Using WD40 on Dysons
« Reply #56 on: December 08, 2017, 03:37:28 AM »
I always hit bearings with wd40 and clean the old grease out with an air compressor along with the WD40 before I grease the bearings. Sometimes if no dirt has gotten inside one, I just put a drop of white mineral oil on the grease and they're spinning like a champ with minimal effort. I've found marine grease to be the best, stuff they use on boats. Resists rusting and corrosion more.

Dyson Cylinder Spare Parts


 

Dyson Spare Parts

Sebo Vacuum Cleaners

Buy a Dyson DC04 Wand Handle

The Dyson Medic Blog

Dyson Spares, Parts, AdviceFollow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram