The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC59 nil output from motorhead to wand  (Read 1067 times)

Offline Buzzebee

  • Member
  • Posts: 2
DC59 nil output from motorhead to wand
« on: May 23, 2017, 02:54:04 AM »
My brush head stopped rotating so I ordered another one and it does not rotate either. I tried the new head in another Dc59 and it works fine. I measured the pins for voltage got nil volts when pulling the trigger. I suspect the circuit board has a fault and needs repair/replacement. Has anyone had this problem and/or had it repaired?


Offline GeorgeJ

  • Member
  • Posts: 390
  • Country: us
  • Gender: Male
  • English? I'm never going to England!
    • Some dirty pics ;)
Re: DC59 nil output from motorhead to wand
« Reply #1 on: May 23, 2017, 04:37:09 PM »
Did you measure voltage from the pins on the the unit or at the end of the extension?
You miss 100% of the Dysons you don't buy.  -Wayne Gretzky
 -Michael Scott  -GeorgeJ

Offline Buzzebee

  • Member
  • Posts: 2
Re: DC59 nil output from motorhead to wand
« Reply #2 on: May 23, 2017, 07:44:01 PM »
I measured the voltage on the pins/contacts for the wand at the motor end. I also removed the wand attachment and measured the contacts inside.

Online ryevac

  • Member
  • Posts: 275
  • Country: gb
  • Gender: Male
  • Trev - not my choice of name - i was given it....
Re: DC59 nil output from motorhead to wand
« Reply #3 on: May 24, 2017, 01:58:51 PM »
remove canistar and check wiring continuity either end of that on the connectors. It is possible to check for voltage on the motor body deep where the canistar clicks in to it i believe.
In other words, fault could be open circuit cable on the canistar rim, also try cleaning the small connectors in question
If it was assembled it can be disassembled - if we can't repair it then it probably isn't worth repairing !


 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram