The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: 1997 Sebo Automatic X1 - Stripdown and Refurbishment  (Read 542 times)

Online beko1987

  • Member
  • Posts: 3696
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: 1997 Sebo Automatic X1 - Stripdown and Refurbishment
« Reply #30 on: August 08, 2017, 10:46:33 PM »
So I had this back tonight.

Wheels swapped over, lesson learnt there!

But, 'it doesn't work well on carpets'... I gave it a go, and the brushroll wouldn't work, and the led's flashed at me in unison... Popped the hood off and the motor to cogs belt had snapped.

Immediatly remembering my attempt to dismantle them, and that I've probably broken the assembly, I swapped the good part off my x4. Job done, it works very well again!

Will splazz some grease on the end bearing tomorrow!

My x4 now hangs in the balance of parts costs vs spares worth... It needs:
Brushroll
Service box
Upholstry tool
Wand
Belt cogs
Belt
Wheels

And its not too mint either. I'll ignore that for now and see what comes up!

The customer is (or will be when she collects it) happy, which is the main thing!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram