Author Topic: DC07 Brush Bar Change Instructions? (Read 9773 times)

Tavolaro · « **on:** April 13, 2011, 03:50:33 pm »

Can anyone send or direct me to instructions for changing a DC07 Animal (with clutch) Brush bar. Standard video does not address clutch model variation on releasing drive belt.

Dyson Tech · « **Reply #1 on:** April 13, 2011, 04:56:15 pm »

See if this helps:

I can answer any other questions you have after watching that video. (Its not our video by the way, and he doesn't rush, but it covers a clutch swap).

Tavolaro · « **Reply #2 on:** April 13, 2011, 06:15:41 pm »

Video was very helpful for brush bar removal and interesting for clutch change.. It removed my concerns about handling brush bar removal too aggressively. Thanks.

MVacs · « **Reply #3 on:** April 22, 2011, 10:34:22 am »

It must be said of the video though, the brush roll housing is not to be separated by stuffing a big screwdriver between it and the main body and swinging on it.

Tilting it back and forth in situ whilst gently pulling it will reveal the position it must be in to come apart.