The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dc25 brush bar runs for a second  (Read 5481 times)

Offline Shogg1988

  • Member
  • Posts: 2
Dc25 brush bar runs for a second
« on: February 17, 2018, 10:25:18 am »
Looking for a bit of advice.
My dc25 brush bar spins for a second then stops.
Put a new head on it and still the same.
Take the head off and im getting 230v between the 2 connections.
Any other ideas what causes this?

Thanks

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6374
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: Dc25 brush bar runs for a second
« Reply #1 on: February 17, 2018, 10:10:26 pm »
Recline the machine, wiggle it about and see if that 230v feed is continuous. Its likely to be intermittent, and >>this<< is the likely culprit. Failing which, I'd be testing the reset switch.

Offline Shogg1988

  • Member
  • Posts: 2
Re: Dc25 brush bar runs for a second
« Reply #2 on: February 17, 2018, 10:16:35 pm »
Tested the loom cables and they seem ok.
How does the reset button work? Power is going through the reset just now and when its pressed in it breaks the supply


Thanks


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram