The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC07 bin flap won't attatch  (Read 5166 times)

Offline dragoncurt

  • Member
  • Posts: 162
  • Country: gb
  • Gender: Male
  • Dyson FTW !
DC07 bin flap won't attatch
« on: February 25, 2018, 09:58:56 pm »
I've got the top bin open part but as I did not leave the bottom of the bin opened so now I can't get the release catch to go back into the bottom of the bin flap. Any correct way to do it as I think it could be just me. Thanks

Offline bluebumble485

  • Member
  • Posts: 386
  • Country: gb
  • Gender: Male
Re: DC07 bin flap won't attatch
« Reply #1 on: February 25, 2018, 10:15:00 pm »
take the rod off the top one screw then there is one side flat slide down between cyclones then tap job done

Offline dragoncurt

  • Member
  • Posts: 162
  • Country: gb
  • Gender: Male
  • Dyson FTW !
Re: DC07 bin flap won't attatch
« Reply #2 on: February 25, 2018, 10:26:10 pm »
Oh yh thank you very much.

Offline dragoncurt

  • Member
  • Posts: 162
  • Country: gb
  • Gender: Male
  • Dyson FTW !
Re: DC07 bin flap won't attatch
« Reply #3 on: February 26, 2018, 06:48:23 pm »
take the rod off the top one screw then there is one side flat slide down between cyclones then tap job done

I tried it but the same "screwdriver" the T one does not let me take the screw out from it, do you know which one I would need as I don't I have the right one.

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6374
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: DC07 bin flap won't attatch
« Reply #4 on: February 26, 2018, 07:46:12 pm »
take the rod off the top one screw then there is one side flat slide down between cyclones then tap job done

I tried it but the same "screwdriver" the T one does not let me take the screw out from it, do you know which one I would need as I don't I have the right one.

To remove the push rod from the cyclone top handle is a T15.

Offline dragoncurt

  • Member
  • Posts: 162
  • Country: gb
  • Gender: Male
  • Dyson FTW !
Re: DC07 bin flap won't attatch
« Reply #5 on: March 02, 2018, 03:48:31 pm »
take the rod off the top one screw then there is one side flat slide down between cyclones then tap job done

I tried it but the same "screwdriver" the T one does not let me take the screw out from it, do you know which one I would need as I don't I have the right one.

To remove the push rod from the cyclone top handle is a T15.

Sorry for my late reply. Thanks for the help, I also instead used a small flat head to get it out. Thanks

DC07 Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram