The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dc50 motor  (Read 1436 times)

Offline Hoover_noob

  • Member
  • Posts: 9
Dc50 motor
« on: March 04, 2018, 02:12:04 AM »
Hey guys,
Anyone know where/how to get a new motor for a dc50? Can't find one on Internet (except on eBay for 60!!!!)
Many thanks

Offline Browntoa

  • Member
  • Posts: 21
  • Country: gb
Re: Dc50 motor
« Reply #1 on: March 04, 2018, 05:53:59 PM »
I can find auctions for a motor complete with switch starting at 14 , a complete unit and PCB at 20 odd and a used motor at 35

Why particularly does it need to be new ?

Offline mrdyson

  • Member
  • Posts: 101
  • Country: gb
  • Gender: Male
Re: Dc50 motor
« Reply #2 on: March 04, 2018, 05:58:14 PM »

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 5151
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dc50 motor
« Reply #3 on: March 04, 2018, 09:15:59 PM »
We have them. Is the machine an ERP or not?

Offline Hoover_noob

  • Member
  • Posts: 9
Re: Dc50 motor
« Reply #4 on: March 04, 2018, 09:49:53 PM »
Sorry whats am ERP?

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 5151
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dc50 motor
« Reply #5 on: March 04, 2018, 10:05:32 PM »
Sorry whats am ERP?

Red MAX slider on the front of the machine's cleaner head. Some parts differ on ERP models.

Failing which, numbers off the motor will do, or first three digits of the machine serial number.

Offline bobbyo

  • Member
  • Posts: 2
Re: Dc50 motor
« Reply #6 on: March 28, 2018, 12:13:32 PM »
Just joined.  Haven't got a clue as to how to log my query so I've used this unconventional approach.  Does anyone know the supply voltage value at the female contacts which connect to the DC50 brush bar pivot. I get a reading of 44V dc but this doesn't seem to be correct.

Online ryevac

  • Member
  • Posts: 305
  • Country: gb
  • Gender: Male
  • Trev - not my choice of name - i was given it....
Re: Dc50 motor
« Reply #7 on: March 28, 2018, 02:46:21 PM »
We could do with a table creating to be honest on this subject.
If head has a rectifier pcb inside then probably should be looking for 240v ac.

I suspect head is motor only on this so should be looking for dc volts but never had one in so i personally can't tell you.


Ball ache, dc24 25 are 240v ac

dc40 41 are dc - again never bothered checking the dc out. wish i had now.


look in main directory for dc 50, and see if beko1987 has done a strip n build on the model ?
If it was assembled it can be disassembled - if we can't repair it then it probably isn't worth repairing !

Offline bobbyo

  • Member
  • Posts: 2
Re: Dc50 motor
« Reply #8 on: March 28, 2018, 08:02:24 PM »
thanks for your help anyway.  Still a bit unsure as to how to rectify fault of brush bar not turning..  Any help would be appreciated.

Dyson Spare Parts


 

Dyson Spare Parts

Freestanding Dyson Cordless Vacuum Stand

Buy a Dyson DC04 Wand Handle

Sebo Vacuum Cleaners

Dyson Spares, Parts, AdviceFollow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram