The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson DC25 Animal re-assembly question  (Read 3753 times)

Offline smilodon1951

  • Member
  • Posts: 2
Dyson DC25 Animal re-assembly question
« on: May 12, 2018, 06:49:44 am »
I am re-assembling the motor housing and ball on my Dyson DC25 Animal.  I forgot to note which way the large bearing is situated - do the inner 'teeth' face in towards the motor housing?  Given the scoring on the motor housing I suspect this is the case but confirmation would be appreciated - thanks.

Offline ryevac

  • Member
  • Posts: 626
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: Dyson DC25 Animal re-assembly question
« Reply #1 on: May 12, 2018, 10:27:36 am »
yes inner teeth towards the motor i think, on the inside of the big bearing there are small teeth which grip onto the motor bucket.

If you get it wrong way round the head doesn't drop correctly.
Please don't ask me how i know this....  ;)
The only way to fail is not to try.

Offline smilodon1951

  • Member
  • Posts: 2
Re: Dyson DC25 Animal re-assembly question
« Reply #2 on: May 12, 2018, 04:18:02 pm »
Thanks for the quick reply.


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram