Author Topic: GTECH AR02 - Brush Bar not turning (Read 14650 times)

dudhid · « **on:** March 07, 2019, 02:17:39 pm »

Hi everyone,

I'm new to this forum and this is my first post. I have a GTech AR02 on which the roller brush isn't turning. I suspect that the cog at the front is worn or that the belt itself is worn. It switches on and the main motor is working.

I have been tearing my hair out over the last 2 weeks trying to access the motor/belt/cog mechanism to have a proper look and despite taking out every removable part and removing all the screws I can see, it is still proving illusive to get at the mechanism.

Does anyone have a strip down guide to this model as I couldn't find anything online / Youtube. I would really like to repair it as it cost a lot of money and I can see that parts are readily available.

Help!

Thanks,
Deepak

MVacs · « **Reply #1 on:** March 07, 2019, 02:47:51 pm »

Its right here in the sticky topics: Gtech Air Ram Mk1 - Brushroll Cog Replacement How to Guide

dudhid · « **Reply #2 on:** March 07, 2019, 03:10:23 pm »

Hi

I saw that but it is for the Mk1 and not the Mk2 which the AR02 is. The Mk1 has the brush roller split into 2 with the motor/belt/cog mechanism running down the middle of the cleaner. The Mk2 has the mechanism on one side and has a one piece brush roller.

Do you have the How To guide for the Mk2?