Hi All, I have a bit of an odd one today - a customer brought in a Vax Air3 in with some belts she had purchased from the Vax Website.
The Brush Bar will spin if its off the ground but as soon as it meets resistance it stops, so of course without even looking further I knew it was a belt problem - probably wrong belt and too big.
The Belts I have are 3M-207-6.5, so 207mm long and 6.5 wide. I clearly need a smaller belt - more like 190mm long but the nearest I can find is a belt for a U89 which is 201mm long.
The Machine in question is a U87-AA-B
The current belt is just skipping over the motor pulley, they are toothed belts.
Anyone else ever come across this dilemma?