Author Topic: DC41 Wand (Read 4460 times)

steelcityuk · « **on:** October 27, 2018, 12:48:43 pm »

Hi.

Does anyone know what holds the red plastic part on the end of the aluminium tube? On the cheapie Dc41 I picked up it's not attached and seems a loose fit.

Thanks.

MVacs · « **Reply #1 on:** October 28, 2018, 04:13:12 pm »

Most things like this are on Beko's strip down topics, in this case >>here<<.

Parwaz7862 · « **Reply #2 on:** October 28, 2018, 04:47:54 pm »

The DC41 wand is glued together on the plastic dark grey pole and red upper part.

steelcityuk · « **Reply #3 on:** October 29, 2018, 10:16:45 am »

Thanks for the info Parwaz.

Beko doesn't separate the red top from the pole so that's why I asked. I'm wondering if I should just buy a replacement.

The DC41 does seem to clean well but feels flimsy if you know what I mean? Mainly that they will crack at the bottom of the spine (mines now fibreglassed) and a good bash of the head will kill it.

Steve.

Parwaz7862 · « **Reply #4 on:** October 29, 2018, 03:00:40 pm »

I think they’re brilliant machines, The flexible is so that it can withstand bumps and bashes, try bending the chassis of an older Dyson and it’ll crack. With a newer one they just have more flex to reduce the cracking.

steelcityuk · « **Reply #5 on:** October 30, 2018, 12:30:59 pm »

They certainly clean well but as I said the base on the one I bought had cracked right through and the air passages had cracks in them too. Could be it had been abused. Anyhow I've got my hands on a DC25 and a DC08 that both need work so I've ordered more stuff from MV. This will be the second motor I've bought (for a different Dyson!), the delivery seems quick and ordering easy.