The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: dc50 erp up15  (Read 3035 times)

Offline dsam

  • Member
  • Posts: 36
  • Country: gb
  • Gender: Male
dc50 erp up15
« on: December 09, 2018, 02:15:42 pm »
Does the erp brushbar fit a non erp up15? and vice versa, non erp fit a erp? Ive seen the post for the dc40 from man vacs says are differnt lenghths but doesnt mention the dc50. thanx.

Offline Angus Black

  • Member
  • Posts: 158
  • Country: scotland
  • Gender: Male
    • Dyson Medic
Re: dc50 erp up15
« Reply #1 on: December 09, 2018, 04:12:36 pm »
Original Dyson brushrolls differ by a few mm meaning they are not interchangeable (unless Dyson fixed that).



Most aftermarket ones fit both now.

There is an old topic on the subject here: DC50 Animal ERP Brushroll

Offline dsam

  • Member
  • Posts: 36
  • Country: gb
  • Gender: Male
Re: dc50 erp up15
« Reply #2 on: December 09, 2018, 07:07:30 pm »
Thanks for clearing that up. there advertised on ebay @ £13 non erp and @ £22ish erp seems crazy dyson did a few mm,s difference. just a tip, I took the ends off 2 worn bbars usual carbon brushes worn and removed the carbon brushes off 1 and replaced with the nylon brushes off the other superglued in so have 1 good bbar with only the 4 blue nylon brushes on, works a treat.

Dyson Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram

Registration