I would be most grateful for any assistance.
Recently serviced my Dyson Model DA001.
Cleaned it up; repaired the Sole Plate (Broken Fixing Screw Pillars) now all appears
to be A OK.
Fitted a new Brushbar and Belt.
Problem is, it refuses to pick up dust and dirt!
No Suction at all!).
No suction at the hose wand, either???
The channel moulded into the sole plate, sits against a rubber gasket when fitted. OK I said; there ought to be suction there. Err, no...
With the bin removed, it blows strongly at the top junction. I suppose this is where the dust etc is supposed to be blown into the bin. ??
All the little valves and flaps seem OK; nothing missing, nothing
Any bright ideas, please?