The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: I've tried fixing the henry but it doesn't work  (Read 612 times)

Offline Dysonboy123

  • Member
  • Posts: 67
I've tried fixing the henry but it doesn't work
« on: February 18, 2019, 11:10:56 AM »
I tried the motor, which was fine. The wires on it, which is fine and the cable which is fine. What should I do?


Online ryevac

  • Member
  • Posts: 383
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: I've tried fixing the henry but it doesn't work
« Reply #1 on: February 18, 2019, 01:20:00 PM »
FINE ? look fine or tested ?

Need to test cables brown / blue backwards on continuity with a meter.

Test switch / switches... speed controller pcb fitted ?
The only failure is not to try.

Offline Dysonboy123

  • Member
  • Posts: 67
Re: I've tried fixing the henry but it doesn't work
« Reply #2 on: February 18, 2019, 10:57:18 PM »
I'll look it again when I get a meter. It'd be a shame to throw Henry out when these vacuums are indestructible. Do the Henry which don't have Autosave have this problem? Like the new ones they've made.

Online ryevac

  • Member
  • Posts: 383
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: I've tried fixing the henry but it doesn't work
« Reply #3 on: February 18, 2019, 11:17:51 PM »
Sorry not familiar with "Autosave" whatever that is ?
Never heard of it.
Maybe someone can enlighten me ?
The only failure is not to try.


Offline Dysonboy123

  • Member
  • Posts: 67
Re: I've tried fixing the henry but it doesn't work
« Reply #4 on: February 19, 2019, 11:01:25 PM »
Autosave is that feature on the Henry's when you turn it on it goes on low mode and you can press the high low rocket switch to make it powerful. Once you turn it off, the Autosave feature goes back to low as default. These Autosaves have a problem with the PCB as it is in front of the motor and the carbon dust goes on the board, shorting it out.

Online ryevac

  • Member
  • Posts: 383
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: I've tried fixing the henry but it doesn't work
« Reply #5 on: February 20, 2019, 01:39:07 PM »
Oh, sorry i always known it as a speed controller.

The only failure is not to try.

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram