The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Help! Air ram going backwards!  (Read 1678 times)

Offline Angiew144

  • Member
  • Posts: 5
Help! Air ram going backwards!
« on: July 13, 2018, 05:06:18 PM »
I just bought a drive cog shaft - delighted to have found one with a metal gear as the nylon ones keep getting chewed up..Iíve fitted it and the horrid noise has gone but now the damn thing is going backwards!! Iíve stripoed it down again and double checked itís all ok, the brushes will spin both ways by hand. What have I done wrong??


Online ryevac

  • Member
  • Posts: 451
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: Help! Air ram going backwards!
« Reply #1 on: July 13, 2018, 05:20:57 PM »
never done one myself, but are the wires connected correctly on motor ?

The only way to fail is not to try.

Offline Angiew144

  • Member
  • Posts: 5
Re: Help! Air ram going backwards!
« Reply #2 on: July 13, 2018, 05:39:38 PM »
Yes the wires have never been disconnected

Online ryevac

  • Member
  • Posts: 451
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: Help! Air ram going backwards!
« Reply #3 on: July 13, 2018, 05:54:42 PM »
Only thing i could imagine was if a gear or sprocket was incorrect then ?
I had a look at Beko's post on this model...

https://manchestervacs.co.uk/DysonForum/index.php?topic=3309.0
The only way to fail is not to try.


 

Dyson Spare Parts

Freestanding Dyson Cordless Vacuum Stand

Buy a Dyson DC04 Wand Handle

Sebo Vacuum Cleaners

Instagram

Dyson Spares, Parts, Advice†††Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram

Registration