The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC25 yoke Loom Assembly Pin Connector  (Read 255 times)

Offline Chinookfarmer

  • Member
  • Posts: 2
DC25 yoke Loom Assembly Pin Connector
« on: October 23, 2019, 11:16:57 PM »
Hi,
I have a friends DC25 and the Brush motor was not working.  I took it apart and found the white yoke loom wire to be broken.  To get a yoke loom shipped to me and buy the part would cost $30 (canada).  I'm wondering if anyone knows the brand or style of the female pin connector at the end of the wire.  It would be easy to fix if I had one of those!
I've posted pics of the red wire connector which is the same. 

Online ryevac

  • Member
  • Posts: 447
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: DC25 yoke Loom Assembly Pin Connector
« Reply #1 on: October 24, 2019, 01:54:05 AM »
possibly jst - rcy ? ??
It's a standard radio controllers power connector crimp, but has an external barb, yours looks to have a blank reccess which is for a plastice external barb.
If you have a r/c model shop etc, take it there and ask.

If so you should also use the correct crimp tool on the 1.4mm gauge.

ila_rendered


Very expensive tool, we use this pa09 crimp tool, only from japan but very good quality.
The whole crimp industry is a nightmare, i currently work with a company on speed controllers (esc) - we use 20 different types from 1mm to 10mm, some call that a plug or a recepticle - others call it a socket - the variation drives me mad.
TBH i would just fit a new yoke cable regardless of the $30 cost.
I think you are saying the white cable has snapped, not unusual and it is possible to repair the loom if desperate.
You can cut back the cable 50mm from the head crimp and 25mm from the side panel crimp and fit a new section, securely and carefully joining the wires, then soldering followed by a small piece of heatshrink, the cable must be silcone sheath and probably 10/01.
I have to do similar at times on up to 700vdc units, easy when you have all the correct equipment.
The only way to fail is not to try.

Offline Chinookfarmer

  • Member
  • Posts: 2
Re: DC25 yoke Loom Assembly Pin Connector
« Reply #2 on: October 24, 2019, 03:58:57 PM »
the 2.54 pitch JST or Dupont connectors are a smaller gauge. Gauge 21 I think.  this wire is gauge 16 or 18 I think. I've included a picture of a 2.54 pitch dupont connector beside the one I'm trying to identify.

Online ryevac

  • Member
  • Posts: 447
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: DC25 yoke Loom Assembly Pin Connector
« Reply #3 on: October 24, 2019, 10:21:06 PM »
oooh that's gonna be a search and a half to find the right one...
Have a look on aliexpress ?
The only way to fail is not to try.


 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram

Registration