The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Miele S718 cutting in and out  (Read 896 times)

Offline yod9999

  • Member
  • Posts: 1
Miele S718 cutting in and out
« on: December 15, 2019, 09:20:28 PM »
Hi all

I'm hoping someone can help me with this. Our old Miele S718 has recently started misbehaving. On the higher power settings the motor cuts in, and then a moment later seems to cut out again. This cycle repeats. On lower settings it seems to run normally. See the video on youtube


This video was with the bag & filters in place, but it's the same without bag/filter. I've stripped it right down and it still does the same without the case etc. There's nothing obviously wrong (no blockages or burnt-looking areas) with either the motor, the circuit board attached to the motor (the motor protection module?), or the circuit board the control the power level.

Does anyone have any suggestions as to what the issue might be? I can buy a new motor

https://www.buyspares.co.uk/miele/s718/motor/product.pl?pid=3724405&path=495346:496792,107733:495376&model_ref=73251

Or motor protection module

https://www.buyspares.co.uk/miele/s718/motor-protection-module/product.pl?pid=1497547&path=495346:496792,107733:495376&model_ref=73251

But I'm reluctant to spend the money without some confidence that one of these might be the issue

Thanks

Neil


Offline Hoover Master

  • Member
  • Posts: 92
  • Country: scotland
  • Gender: Male
  • I like dyson,numatic and miele most.
Re: Miele S718 cutting in and out
« Reply #1 on: July 25, 2020, 11:53:43 PM »
Sorry for the delay, but I had a Miele with the same issue and a new PCB had it working again!

 

 

FFP2 N95 Face Masks

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram