The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC07 post motor filter  (Read 461 times)

Offline ringer

  • Member
  • Posts: 20
  • Country: gb
  • Gender: Male
DC07 post motor filter
« on: March 18, 2020, 10:41:40 PM »
First, my earnest thanks to Beko 1987 for his series on strip & rebuilding Dysons.
There is a point I dont understand in the one about the DC07. In part:

Quote
The post motor filter cover pops off now

but the accompanying photo is not clear. Do you really just stick a screwdriver in &
force? I am afraid of breaking something. I suspect that you must use the right s/d,
in the right place, & twist the right way. Thank you for advice.


(I would have replied to that topic but the system asked me to start a new one).
mark

Online ryevac

  • Member
  • Posts: 555
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: DC07 post motor filter
« Reply #1 on: March 19, 2020, 11:15:50 AM »
Just use a small flat blade screwdriver, you need to just lever the barb at the front, and then one at each side. not much leverage is required
The only way to fail is not to try.

Offline ringer

  • Member
  • Posts: 20
  • Country: gb
  • Gender: Male
Re: DC07 post motor filter
« Reply #2 on: March 20, 2020, 03:27:12 PM »
Thank you Ryevac  :tiphat:. With heart in mouth I levered it open: success.
mark

DC07 Spare Parts


 

 

N95 Face Masks

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram

Registration