The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Wiring Power Cable and Spine Cable to Switch  (Read 77 times)

Offline ruth

  • Member
  • Posts: 1
Wiring Power Cable and Spine Cable to Switch
« on: May 19, 2020, 01:17:23 PM »
Hi, I have just bought a replacement power cable for my Dyson DC01.  The cable broke ages ago and I disconnected the old one then.  Looking for help to confirm the connections.  The spine cable has the neutral (blue) wire connected to a white connection box does the blue wire from the power cable connect to the other end of this?  The live wire from the spine cable was connected to the on-off switch with a boot white connector.  I have just purchased a spade connector boot to use for the live wire from the power cable, does this then attach to the second spade on the on-off switch.   Difficult to see in the small diagrams.  Probably a very basic question.  Thanks in advance. 
 

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 5621
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Wiring Power Cable and Spine Cable to Switch
« Reply #1 on: May 19, 2020, 03:47:14 PM »
The live goes to the switch, and from the switch onward into the machine.

Blue connects to blue.

It should look like this:


DC01 Spare Parts


 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram