The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC25 Mystery spring!  (Read 141 times)

Offline PatrickMoore

  • Member
  • Posts: 2
DC25 Mystery spring!
« on: June 24, 2020, 01:54:36 PM »
I stripped my DC25 to component parts for a deep clean as per Beko 1987's super helpful guide. However, AFTER  everything had been washed, reassembled, and tested working I noticed I had this left over spring! I can't recognise where it's from, it's not the brush bar belt tensioner (I visually checked there is a spring in the hole there).

Do you recognise where it's from? It's quite a stiff one

PS. Pen for scale

Offline PatrickMoore

  • Member
  • Posts: 2
Re: DC25 Mystery spring!
« Reply #1 on: June 24, 2020, 05:38:06 PM »
Solved...

Thr mystery spring was the belt tensioner. Thr spring I'd put in the belt tensioner location was the bin release spring. The bin release spring wasn't replaced. All speings are now correctly fitted.

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 5662
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: DC25 Mystery spring!
« Reply #2 on: June 25, 2020, 07:32:21 PM »
You solved it before I saw it!  ;D



 

 

FFP2 N95 Face Masks

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram