Author Topic: Dc27 actuator arm and clutch cover (Read 2751 times)

mopardave · « **on:** June 25, 2020, 11:14:34 pm »

Evening gents. I've just fitted a new motor to my dc27. The strip down was a bit of a pig but the rebuild is worse! I've fallen at the last hurdle.... I'm having problems refitting the clutch cover and actuating arm. Can anyone give me any guidance before I Wang it through a window! Do I refit the clutch cover first? It doesn't seem to want to fit properly and I can't get it to mate up with the actuator arm. Any help would be gratefully received. Also I forgot to tape the connectors together on the motor..... Do you think I should strip it back down and tape them up?
Many thanks

Many thanks!

bluebumble485 · « **Reply #1 on:** June 28, 2020, 08:56:51 pm »

just put arm under cluch cover ease in with large screwdriver into place it just snaps in I have changed 3 during lockdown getting my head around them now

mopardave · « **Reply #2 on:** June 28, 2020, 09:43:06 pm »

Mate.... Thanks for replying! I've done.... Brute force and ignorance!! It was a pig to rebuild......just getting the clear moulding off the brush head was the worst bit. Love Dysons.... Hate the way they're put together!

bluebumble485 · « **Reply #3 on:** June 28, 2020, 09:56:52 pm »

the dc27 is not a good dyson to cut your teeth on tbh they are not easy my 1st motor took me 2 1/2
hours lol,not so long now glad you are sorted thanks