The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dc01 no suction in wand  (Read 795 times)

Offline spilliow1

  • Member
  • Posts: 1
Dc01 no suction in wand
« on: August 09, 2020, 01:25:11 PM »
I have read so many stories about the problems people have had with the loss of suction in their DC01 wand. Well I have just had the same.
    Owning a hotel for 10 years, I ran 2 of these models, usually repairing them with no difficulty as they are such a simple and versatile machine. The best of the range I think. When I retired I took one with me so mine is probably 20+ years.
    Recently I lost power to the machine so, after checking where the cable enters the machine, I found a severed wire. A common problem and after a repair I screwed back the inspection/ access panel just below the on/off switch. That's when the problems started. My hose would not pick up at all; no suction. I used Google and found this site. It has been so useful although even though I tried all the remedies to solve my problem I could not. I virtually stripped stripped the whole machine, cleaned out the dust and fluff, checked the seals etc etc. But no luck. I was at a loss so I thought about it over the days and finally checked the inspection/access panel again. I noticed that everything is a little tight with all the wires inside and the panel was a little proud fron the body. So I rearranged the connectors / wiring a little and managed to screw the panel flush. And Hey Presto that's all it was! It was preventing the cyclone bin from sealing when closed. I hope this story might help certain people who have been scratching their heads after the loss of suction in their wand.

Online ryevac

  • Member
  • Posts: 594
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: Dc01 no suction in wand
« Reply #1 on: August 10, 2020, 01:10:28 AM »
 :thumbsup:
The only way to fail is not to try.

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 5752
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dc01 no suction in wand
« Reply #2 on: August 10, 2020, 03:50:39 PM »
Welcome to the site, Spillow. Al info is good info.  :thumbsup:

DC01 Spare Parts


 

 

FFP2 N95 Face Masks

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Sebo Vacuum Cleaners

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram