Vax 3 in 1 multivac parts

[Gavlaar]

• Tweet

Hello fellow vax nerds . I cannot find certain parts for my machine for love no money! Even vax have stopped doing them . Anyone know of a vax specialists in the U.K or europe that hold a lot of stock? I am after the following:

https://www.vax.co.uk/spinscrub-wash-tool-1-9-130677-00
https://www.vax.co.uk/filter-water-inlet-1-7-124677-00

I have found the latter on a Russian website but, I no par Ruskie and I'm not keen on novicok

Thanks.

[Joe101]

Hi

Your links don’t open. I have two machines in bits, I probably have what you need.

[Gavlaar]

They work for me  . The water filter is on to tube to the water pump that sits in the top ring tank that sucks up the clean water. The spin scrub head is on a set of wheels on it, pick end it has spinning brushes. Should have spin scrub printed on it. Was standard on the 6151t or could be bought separately.....

[MVOlga]

I no par Ruskie and I'm not keen on novicok

I do gavarit paruski and the alleged Novichok nonsense wasn't what the UK media told you. Educate yourself >here< and join the 19-page conversation if you wish. If Russia wants to dispose of a traitorous spy abroad - as many nations including the UK have done - there are much easier, lower profile and less obvious ways of doing it. The spy was never made available for interview. The story is full of holes.

I'm sure you were joking and no harm was done, but the western media is prone to habitually lie about Russia.

Your links open just fine here.

There are many Russian sites listing parts, some are just catalogue sites to catch advertising revenue. Vax isn't a well-known brand in Russia. I doubt there is a parts network there. I'd not recommend ordering Vax parts from an unknown Russian site. I would be happy to advise if I thought a specific Russian site was a valid or credible one though.

Hopefully someone here can help you further.