The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!  (Read 8617 times)

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #15 on: October 29, 2020, 03:49:02 pm »
The good thing about doing this from 2 machines is I can choose the parts that came out the best, on silly things like these front wheel axles

ila_rendered

The best wheels

ila_rendered

ila_rendered

After lots of polishing the original paintwork is firmly in patina territory, rather than trashed!

ila_rendered

Best stick the motor down

ila_rendered

Plug all the wires back in and route them all

ila_rendered

ila_rendered

An brushroll and new belt fitted

ila_rendered

These parts were the lesser of a pair

ila_rendered
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!


Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #16 on: October 29, 2020, 03:52:06 pm »
We take a slight tangent here. On both of the machines so far, neither had a complete handle bail's worth of non damaged parts. So I paid postage for this poor old thing

ila_rendered

ila_rendered

Can't notice much difference tbh...

ila_rendered

ila_rendered

Especially after I polished the hood

ila_rendered

Soon we have lots of parts again

ila_rendered

And a correct 652a rear wheel axle

ila_rendered

A much nicer lower handle cover

ila_rendered

And most needed, a non bent handle bail axle

ila_rendered
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #17 on: October 29, 2020, 03:56:37 pm »
Time to rebuild

ila_rendered

Axle in one side, then fit the spring and flange latch

ila_rendered

Wire clip and circlip

ila_rendered

Height adjust pedal

ila_rendered

A non bent height adjuster bracket came out of the scrapper too

ila_rendered

Recline lock can be built up

ila_rendered

ila_rendered

Rear wheel axle fitted with the space shim

ila_rendered

Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #18 on: October 29, 2020, 04:01:44 pm »
A non cracked tool port diverter flap came up too!

ila_rendered

A spring hole is drilled into the 652a chassis for the height adjuster spring

ila_rendered

ila_rendered

That's all looking much better

ila_rendered

Time to build the cable up quickly

ila_rendered

Find a more appropriate bulb

ila_rendered

ila_rendered

Fashion a bag flange seal out of silicone

ila_rendered

And with the handle from the scrapper fitted it looks a fair bit better



It all works alot better too!


I guess we need some up to date pics of it now...
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!


Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6383
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #19 on: November 01, 2020, 02:51:55 pm »
Bazzing refurb! I'll get some photos of it this week.  :icon_nod:

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #20 on: November 02, 2020, 10:28:08 am »
I like doing these sort of refurbs, open a box of rubbish and find a diamond in the rough!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6383
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #21 on: November 03, 2020, 11:38:38 am »
I like doing these sort of refurbs, open a box of rubbish and find a diamond in the rough!

Speaking of which, the 262 wants to come home!

Here's piccies of the 652 today.







I'd like a new badge on the head if one crops up.

Offline beko1987

  • Member
  • Posts: 5044
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: Hoover Senior 652a/6525a - Restoration for the ManchesterVacs museum!
« Reply #22 on: November 03, 2020, 01:25:41 pm »
262 still needs paint, been raining here constantly, and now it's sunny I'm neck deep in my day job...
Haven't got the kids this weekend, concerted effort is needed
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram