The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC07 Roller Brush - Bristle Length  (Read 4697 times)

Offline methuselah969

  • Member
  • Posts: 2
  • Country: au
  • Gender: Male
DC07 Roller Brush - Bristle Length
« on: February 12, 2021, 01:13:02 am »
I have just finished completely cleaning the Cyclone and everything else on my 17 Year Old DC07. The roller brush looks ok, but just wondering if anyone knows the length of the bristles?

Many thanks & greetings from Australia

Online bluebumble485

  • Member
  • Posts: 387
  • Country: gb
  • Gender: Male
Re: DC07 Roller Brush - Bristle Length
« Reply #1 on: February 12, 2021, 12:19:31 pm »
no idea just lube it up and try if it picks up ok you will know its all ok

Offline ryevac

  • Member
  • Posts: 626
  • Country: gb
  • Gender: Male
  • Optimism is the faith that leads to achievement
Re: DC07 Roller Brush - Bristle Length
« Reply #2 on: February 12, 2021, 02:23:40 pm »
There was a thread on this subject somewhere....

They are pretty indestructable i think, unless it has been used over stone floors and makes little difference if they are a little worn.
The actual length from new i thought was around 6-7mm ?
Never had one wear out, only replaced due to being cut through due to carpet thread or the bearing seized, causing massive heat build up damaging the bar.
The only way to fail is not to try.

DC07 Spare Parts



Trade Dyson Spare Parts



Dyson Spare Parts



Freestanding Dyson Cordless Vacuum Stand



Buy a Dyson DC04 Wand Handle





Buy a police truncheon




Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram