Sebo Automatic x1.1

[Simon12345]

• Tweet

Hello.  I have a Sebo Automatic x1.1 with a faulty height adjustment - basically this does nothing.  I've traced it to the mains transformer which has an open circuit primary.  Fitting a new transformer to the PCB is a fairly straightforward soldering process, but what is the secondary voltage of this transformer !  Being open circuit I cannot measure it and it is not written on the board(s).  Thanks in advance.

[MVacs]

Most people simply replace the unit if it's faulty.

You've changed the brushroll have you? That is the usual culprit for height issues.