The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: How to fit a DC41 cyclone release catch?  (Read 316 times)

Offline joshuank

  • Member
  • Posts: 1
How to fit a DC41 cyclone release catch?
« on: May 27, 2022, 07:08:31 PM »
Hello, we have a Dyson DC 41 vacuum. We have broken the red release button. We have the new one, and are looking to replace it. We canít figure out how to remove the old release button. I saw something about the DC 40 having the same procedure, but as a new user I canít seem to find that post! Any help would be appreciated. By the way, I found you by using an Internet search. Thanks, Joshua

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6117
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: How to fit a DC41 cyclone release catch?
« Reply #1 on: May 28, 2022, 09:22:25 AM »
Hello Joshua, I moved your post here. Have a look >>here<<

That’s what you want if you only need to replace the top section. If you need to replace both, you need to strip the cyclone down to fit the lower one, in that case look at the DC40/41 strip down topics in the sticky topics in this room.

Dyson Spare Parts


Trade Dyson Spare Parts

Dyson Spare Parts

Freestanding Dyson Cordless Vacuum Stand

Buy a Dyson DC04 Wand Handle

Buy a police truncheon


Dyson Spares, Parts, Advice†††Follow us on Twitter

Manchester Vacs on Instagram