The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC15 cable replacement /repair  (Read 723 times)

Offline billythefish

  • Member
  • Posts: 23
DC15 cable replacement /repair
« on: February 28, 2023, 03:27:29 pm »
Hi. I have obtained a working DC15 with several damages sections on the power cable. I have cut the cable to remove the nasty bits leaving about a metre of decent, undamaged cable going into the casing of the DC15. I have a complete, spare cable that I removed removed from an earlier Dyson (DC04 I reckon). I'm debating whether to try to get to the inside of the machine to swap the cable completely or take the easier option and make a safe connection of the two cables.  I have replaced the cable on a DCO4 but not the DC15. All thoughts welcomed. cheers

Offline matrixresonator

  • Member
  • Posts: 64
  • Country: gb
  • Gender: Male
Re: DC15 cable replacement /repair
« Reply #1 on: February 28, 2023, 06:07:00 pm »
Been a while since I worked on a DC15, but I think they're pretty much the same as DC07 onwards.  Unplug it first, remove hose and wand, then there are screw/screws behind the switch unit which then clips off.


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram