Author Topic: HELP (Read 10090 times)

neville · « **on:** November 29, 2011, 04:32:14 pm »

The seal in the bin under the handle are torn to bits anybody any help of where to get a new one or what to use to make one? Dyson want 36 notes for the whole bin which is a bit too much.

MVacs · « **Reply #1 on:** November 29, 2011, 10:05:45 pm »

Quote from: neville on November 29, 2011, 04:32:14 pm

The seal in the bin under the handle are torn to bits anybody any help of where to get a new one or what to use to make one? Dyson want 36 notes for the whole bin which is a bit too much.

Which model of Dyson Neville?

neville · « **Reply #2 on:** November 29, 2011, 11:24:21 pm »

Quote from: MVacs on November 29, 2011, 10:05:45 pm

Quote from: neville on November 29, 2011, 04:32:14 pm
The seal in the bin under the handle are torn to bits anybody any help of where to get a new one or what to use to make one? Dyson want 36 notes for the whole bin which is a bit too much.

Which model of Dyson Neville?

A dc 27 animal

MVacs · « **Reply #3 on:** November 30, 2011, 07:43:53 am »

We have a DC33 in the shop, I *think* they are the same cyclone. We are closed today, but I'll take a look at it tomorrow and see if the seal looks familiar.

neville · « **Reply #4 on:** November 30, 2011, 08:24:48 am »

Quote from: MVacs on November 30, 2011, 07:43:53 am

We have a DC33 in the shop, I *think* they are the same cyclone. We are closed today, but I'll take a look at it tomorrow and see if the seal looks familiar.

Thanks

MVacs · « **Reply #5 on:** December 05, 2011, 09:29:13 pm »

Just an update - I haven't forgot about this Nev, we are trying to find another seal that might do the job.

neville · « **Reply #6 on:** December 06, 2011, 07:57:19 am »

Quote from: MVacs on December 05, 2011, 09:29:13 pm

Just an update - I haven't forgot about this Nev, we are trying to find another seal that might do the job.

Na bother

, I have been trying to look for something that will do as well,do you think a thin piece of rubber would do it?

MVacs · « **Reply #7 on:** December 06, 2011, 08:09:17 am »

Yes. Its not a complicated seal and its under no pressure. Anything that will stretch enough to sit in the slot will do. I'll have a root through our box of randomness we have today.

neville · « **Reply #8 on:** December 06, 2011, 01:14:53 pm »

Quote from: MVacs on December 06, 2011, 08:09:17 am

Yes. Its not a complicated seal and its under no pressure. Anything that will stretch enough to sit in the slot will do. I'll have a root through our box of randomness we have today.

cheers that would be great

neville · « **Reply #9 on:** December 08, 2011, 04:01:43 pm »

Quote from: neville on December 06, 2011, 01:14:53 pm

Quote from: MVacs on December 06, 2011, 08:09:17 am
Yes. Its not a complicated seal and its under no pressure. Anything that will stretch enough to sit in the slot will do. I'll have a root through our box of randomness we have today.
cheers that would be great

Hi there I have just took apart a DC14 and compared the cyclone part to the DC27, the rubber that fits the DC14 will fit the DC27 do you have a spare one?or can you source one? if so how much?thanks any other suggestions are welcome

neville · « **Reply #10 on:** December 08, 2011, 07:15:22 pm »

Quote from: neville on December 08, 2011, 04:01:43 pm

Quote from: neville on December 06, 2011, 01:14:53 pm
Quote from: MVacs on December 06, 2011, 08:09:17 am
Yes. Its not a complicated seal and its under no pressure. Anything that will stretch enough to sit in the slot will do. I'll have a root through our box of randomness we have today.
cheers that would be great
Hi there I have just took apart a DC14 and compared the cyclone part to the DC27, the rubber that fits the DC14 will fit the DC27 do you have a spare one?or can you source one? if so how much?thanks any other suggestions are welcome

Alright there, do you have any end caps for the brush bar of a DC14 vroom in your box of randomness?