DC33 motor rim height check

[MarkSpace]

• Tweet

Hi,

I have a DC33 Animal (240V). The motor failed with low power and a strong smell. It has a failed winding on the motor armature, so I'd like to buy a new motor. The current motor is YV-16K24EE. If I stand the existing motor on a table, spindle up and with the rim lowermost, the distance from the top of the rim down to the table is 45mm. If I measure the height of the rim itself, it's 35mm. Your replacement motor, https://shop.manchestervacs.co.uk/dyson-upright-vacuum-cleaner-spares/dc33-spare-parts/dyson-motor-ydk-yv-dc04-dc07-dc14-dc27-dc33 , shows the rim as being 45mm high. Is that measured from the bottom of the motor to the top of the rim (in which case it matches mine), or from the bottom of the rim to the top of the rim (in which case it doesn't? (The overall height, 128mm, seems to match mine.).

Thanks.

[MVacs]

There is an alternative motor fitted to a few DC33s, I believe we have one, I will revert to you tomorrow.

[MV Claire]

Our standard motor that you can find here will fit your machine.

[MarkSpace]

Thank you, will order it.