The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC75 head issue  (Read 335 times)

Offline b21playa

  • Member
  • Posts: 2
DC75 head issue
« on: January 24, 2024, 12:02:46 pm »
Hi all,

New to the forums, thanks for having me  ;D

I have a dc75 which the brushbar has decided to stop spinning. I have tried the head from my DC40 and that didn't work on it either so guess there is some other fault.

Is this common and has anyone experienced this and could point me in the right direction?

Many thanks in advance

Offline b21playa

  • Member
  • Posts: 2
Re: DC75 head issue
« Reply #1 on: January 24, 2024, 03:42:51 pm »
also just tried head from my other dc7 and that didn't work in it either

Offline macman

  • Member
  • Posts: 324
  • Country: gb
  • Gender: Male
Re: DC75 head issue
« Reply #2 on: January 25, 2024, 01:38:45 pm »
So that is telling you that there is no power to the head. Did you try swapping the other way: i.e. suspect head on known good body?
Then you need to check the DC output to the head terminals on the body with a multimeter. usually around 300V DC. If no power there, which seems to be the case, then it's either a broken loom, blown PCB, or faulty switch. Follow the wiring path back up and test the continuity at each stage.

Dyson Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram

Registration