Sebo Felix Pet stopped working altogether while using

[Bentley14]

• Tweet

Stopped working while using. Changed fuse but nothing still

Any advice on how to identify the problem? Any thoughts what it might be?

[macman]

Continuity test the cable from plug to switch, and switch to motor.
If the motor has blown you would normally hear a popping sound, and maybe some smoke.

[MVacs]

Most likely the power cord has failed where it enters the handle.

Here's how to diagnose if it's just the flex at fault: plug it in and switch it on. Grasp the power cord a few inches from where it goes into the handle. Move it very gently and slowly up and down, side to side and maybe round in a circle. Try twisting it a little left and right. If the machine bursts into life, even for a moment while you are doing that, then it needs a replacement power cord. In this case, the cable has broken internally and a new one will fix it.

If that doesn't work, try doing the same a few inches back from the plug.  Very occasionally, they can fail where the wire goes into the plug.