The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson dc75 brushbar  (Read 403 times)

Offline b21playa

  • Member
  • Posts: 5
Dyson dc75 brushbar
« on: April 08, 2024, 02:52:41 pm »
Hi all

I have a dc75 and the brushbar works fine if the angle is past a certain point. If I tilt it slightly too upright, the brushbar turns off. I can only presume either some switch or spring has come off.

Does anyone know how this could be fixed. Is there an angle switch or spring?

Thanks in advance

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6424
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: Dyson dc75 brushbar
« Reply #1 on: April 08, 2024, 08:43:14 pm »
It sounds like the yoke loom.

ila_rendered

Take it apart and test that with a meter. They break inside.

Offline b21playa

  • Member
  • Posts: 5
Re: Dyson dc75 brushbar
« Reply #2 on: April 09, 2024, 05:27:38 am »
It sounds like the yoke loom.

(Attachment Link)

Take it apart and test that with a meter. They break inside.

Thanks. Is it hard to dissemble?

Offline MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6424
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: Dyson dc75 brushbar
« Reply #3 on: April 09, 2024, 01:30:52 pm »
Much like a DC41, and there is strip down topics here on those.

Before you do, take the head off, put a meter on the two connectors from the machine, you are looking for circa 320v DC. Try and replicate the fault while watching the meter. That will tell you if it is the loom. It probably is, but that will tell you for sure before you strip it down.

Offline b21playa

  • Member
  • Posts: 5
Re: Dyson dc75 brushbar
« Reply #4 on: April 09, 2024, 02:40:44 pm »
Much like a DC41, and there is strip down topics here on those.

Before you do, take the head off, put a meter on the two connectors from the machine, you are looking for circa 320v DC. Try and replicate the fault while watching the meter. That will tell you if it is the loom. It probably is, but that will tell you for sure before you strip it down.
Thank you very much  :thumbsup:

Dyson Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram

Registration