Administrative > Site Index, Useful Information, Administrative Issues & Site Announcements

Manchester Vacs News

(1/51) > >>

MVOlga:
Our plan with this topic is to add posts about new events that may be of interest. If something is on offer, something is no longer available or we stock a new line, etc. It will keep our forum readers up to date with any news.

First item: We have now finally run out of some new DC01 parts: the new DC01 combined fixed base and sole plates we imported. They look like this......



If you do not know the difference between the two types, there is a topic here: Dyson DC01 Variants: Fixed and Swivelling Sole Plates -- The Differences. The swivelling type we still have.

We are also out of YDK type DC01 motors. We still have some used Ametek ones.

There is a topic about the supply of DC01 and DC02 parts here: Dyson Discontinue Support and Parts Supply for the DC01 and DC02

Nobody that we can find now has the DC01 YDK motor or the fixed sole plate in stock. We will of course get some good ones from old machines we dismantle, and we will be starting a "wants" book for anyone waiting for them. If you need a DC01 YDK motor or a fixed sole plate, to get on the list for a used one, contact Claire in our shop. Our contact details are >>here<< and please make sure you send us a number too.

MVacs:
The DC01 parts page has been updated today. Some new parts have gone down in price, some stuff that is unavailable now has a link to shoot us an email to get on the waiting list to be informed when we get a used one.

The good news is that we got a fresh batch of DC01 brush rolls in yesterday that I thought had finished.

MVacs:
DC01 motor armatures now in stock. See the topic here: DC01 YDK YV-940 Motor Armatures Now Available! The DC01 Lives On.....

MVacs:
DC08 Matsushita/Panasonic/UDS1554CNA motor conversion kits now available overseas from this page: Dyson Spares Worldwide

MV Claire:
Our Dyson trade tool set looks like this:
 

 
Recently, we were not able to get the Draper screwdrivers we need fast enough, or in the quantities we need from our regular tool suppliers.
 
We didn't want to use cheaper, inferior brands like Silverline (because our tech said they were rubbish and people might complain). So what we did was approach Draper themselves. Eventually, they agreed to supply us direct.
 
What this means to you is that all the torx screwdrivers we now supply in our trade tool kits are Draper ones; the T8, T10 and the T15. The latter two are still tamper-proof tips. All are the better spec ones are now with the strengthened tips. All three now match each other in your tool box. We supply this stuff to the trade, and you guys expect good quality stuff that lasts.
 
The other good news is, although we have increased the quality, we haven't increased the price because we have cut out the middle man.
 

Navigation

[0] Message Index

[#] Next page