Author Topic: Manchester Vacs News (Read 282061 times)

MVacs · « **Reply #135 on:** December 06, 2014, 03:23:00 pm »

We came across two very rare parts in a job lot of new parts we bought this week from a Dyson dealer closing down.

A DC01 FIXED soleplate assembly. Part number 900774-01.

A DC05 Panasonic SDS1204SD Motor. Part number 901590-04.

These items are £45 each including UK Recorded Delivery. We only have one of each. First come, first served. Contact us if you want either.

MVOlga · « **Reply #136 on:** December 19, 2014, 01:36:23 pm »

We have been waiting a long time for these, and finally they are here.

Another Manchester Vacs first: We are the UK's first and only stockist of after-market Dyson Airblade filters.

These are now in stock and you can get them here: Dyson Airblade Hand Dryer Filter.

MVacs · « **Reply #137 on:** January 02, 2015, 04:32:59 pm »

Another part that is new in stock: DC15 wand collars. You also wont find these anywhere else.

They can be found here: DC15 Wand Collar Top (Tool Connector)

MVacs · « **Reply #138 on:** January 02, 2015, 06:25:52 pm »

Another part that is new in stock: Wand cord retaining swivel clips.

Here is how they look on a DC15.

These fit the following models only:

DC15
DC24
DC25
DC27
DC28
DC33

You can get one of these here: >>DC15, DC24, DC25, DC27, DC33 Wand Cord/Cable Retaining Clip<<

MVacs · « **Reply #139 on:** January 09, 2015, 01:56:07 pm »

Today, we have been able to reduce the price of DC25 and DC41 DC771(2)XLLG cleanerhead/brushbar motors by a whopping £20!

They now cost £27.99 inc UK delivery. You can get one here: >>Dyson DC25 and DC41 DC771(2)XLLG cleanerhead/brushbar motor<<

MVacs · « **Reply #140 on:** January 12, 2015, 06:03:24 pm »

People often ask us for multimeters. A must when testing brushroll motors, PCB's and pretty useful generally on any electrical-related repair. We have now tracked down some budget ones we think are OK, that have the right ranges for Dysons.

You can find them here: >>Buy a multimeter<<.

MVacs · « **Reply #141 on:** January 12, 2015, 06:30:28 pm »

We have added to the shop today four more items:

>>20724-01-01 DC41 belts<<.

>>DC40 brushrolls<<.

>>DC07 yellow cyclone tops<<.

>>Genuine Dyson belts for non-clutched machines<<

MVacs · « **Reply #142 on:** January 14, 2015, 10:01:44 pm »

Another new line added today: DC01/DC04 genuine wheel kits.

These have been obsolete from Dyson for years, but we managed to bag around 100 of them this week. When they are gone, they are gone! We will probably never see any more.

Say goodbye to wobbly wheels and get a set here: Dyson DC01 Wheel Kit 901428-01

MVacs · « **Reply #143 on:** February 12, 2015, 05:13:43 pm »

We are now stockists of Smiths Torx screwdrivers.

We have the T15 one.

Which is here: Dyson T15 Star Screwdriver.

For those who work on later machines, we also have a set of three: T15, T10 and T8.

Which can be found here: Set of three Dyson Torx screwdrivers.

MVacs · « **Reply #144 on:** February 13, 2015, 05:19:45 pm »

We now have the tool adaptors in stock that allow the 32mm tools that look like this:

to be used with later upright, cylinder, cordless and hand-held machines that have this tool fitting:

They look like this:

And you can find them here: >>Dyson tool adaptor/converter<<

MVacs · « **Reply #145 on:** February 16, 2015, 05:32:19 pm »

We came by a pile of rather old new stock over the weekend.

Here are a couple of the rarities that are interesting:

DC01 motors.

DC02 motors.

A DC03 clear cyclone unit.

And last but not least, DC02 cable rewinds!

The cable rewinds can be had while stocks last >>here<<, for one of the motors or the cyclone please >>contact us<< to check availability. This stuff isn't cheap as we had to pay strong money to own it and drive a long way, but it is available.

MVacs · « **Reply #146 on:** February 20, 2015, 04:39:39 pm »

Two small items added to the shop today.

A universal tool set

Which can be found here: Dyson universal tool set

And the DC26 HEPA filter.

Which can be found here: DC26 post motor HEPA filter

MVacs · « **Reply #147 on:** February 24, 2015, 10:46:44 pm »

Two more items added.

DC04 brushroll end caps.

Which you can find here: Dyson DC04 Brushroll End Caps

Airblade tap filters.

Which you can find here: Dyson Airblade tap AB09, AB10 and AB11 Filters

MVacs · « **Reply #148 on:** March 27, 2015, 10:36:42 pm »

Due to changes in the industry, our DC04, DC07, DC14, DC27 and DC33 motors now have four buying options:-

Budget: These are what the suppliers call 'made to a price'. These are made to serve the bulk market where people buy on price only (eBay and Amazon for example). I am not terribly fond of them, but some people want cheap.

Premium: These are the super quality motors we have always used and sold that are made in the USA. As the pound is poor against the dollar at the moment, the price of these has risen a little of late. These are the ones we recommend. These are the ones we use on our own machines.

Genuine: While we are adding options, we decided to add genuine in there as well. For those that prefer a genuine part that comes in a Dyson box, we have now made the most popular YV2200 motor available from that page too.

Genuine DC04 Ametek:These are the long-obsolete Ametek motors we still have. Genuine Dyson part number 911930-01. These are only for non clutched DC04's that are lime green/grey, silver/orange or grey/blue.

It is normally impossible to judge the quality of what you are going to buy online when buying a motor for your Dyson (because you don't know what the seller will send you), and buying on price alone can be a false economy as this article suggests: Cheap Dyson Motors - 150 Reasons Not To Buy One. So we have decided to completely demystify it by offering three variants with honest descriptions. We think it better the end user can make an informed choice when buying a Dyson motor. We expect other sellers will follow our example.